Opis: SLT distribution terminals are designed for copper and aluminum conductors with a cross-section of up to 50 mmïżœ (Al) or 35 mmïżœ (Cu). Multiple copper conductors can be placed in the terminals depending on the type. All terminals have 2, 3, 4 or 6 inputs and four types (SLT 50-2-1, SLT 50-3-2, SLT 50-4-3 and SLT 50-6-3) plus an additional connection point (1) with a cross-section of 2.5 mmïżœ for the possibility of connecting conductors with a smaller cross-section, e.g. LED lighting. The protection degree of SLT distribution terminals is IP23. SLT distribution terminals are tested and certified according to class A. Distribution blocks are tested and certified according to the following standards: EN 60947-7-1:2009, EN 61238-1:2003. SLT distribution terminals can be installed in public lighting poles or as a separate installation element!
Distributivni blokovi su napravljeni za bakarne i aluminijumske
provodnike. Mogu se koristiti za sve tipove bakarnih i
aluminijumskih provodnika sa popre?nim presecima do 50 mmïżœ
(AL) / 35 mmïżœ (Cu). Vise bakarnih provodnika moïżœe biti postavljeno
u blok u zavisnosti od njegovog tipa. Poseduju IP20 zaïżœtitu.
Svi blokovi poseduju 4 do 6 glavnih veza, a dva (SLT 50-4-3, SLT
50-6-3) I dodatne veze (1) do 2,5mm2 za povezivanje malih kablova,
npr. LED svetla.
PretraĆŸite proizvode po ĆĄifri ili nazivu(Unos treba da na Engleskoj tastaturi)
